High performance CK61160 cnc turning lathe with span of guideway
These series are economical CNC horizontal lathe, which are not
only suitable for automobiles, tractors, militaries, machines and
other industries, but also can be used for the machining of the
inner and outer cylindrical surface, conical surface, circular arc
surface, end face, groove cutting etc.
1.The control system uses a wide number of funuc oi-TF (1 package).
2.1.5 m, 3 m X / Z motor with funuc feed servo motor 20Nm; 5 m, 6 m
X / Z motor 22 / 36Nm.
3.The main motor adopts Funuc servo motor 22kw.
4.Shenyang vertical 4-station electric knife.
5.Electrical components Schneider.
6. X / Z to the use of domestic famous precision ball screw.
7.Spindle bearings using domestic famous products.
1.Rail width of 755, load-bearing 6 tons, can change the weight of
2.Without semi-protection. Increase the cost of another.
3.Can be added chip machine. Increase the cost of another.
4.5 meters above the lead with a screw support.
5.Can be changed to the overall bedside box structure.
6.The air box does not have air conditioning.
|CAPACITIES||Swing over bed||mm||1600|
|Swing over carriage||mm||1250|
|Max.length of workpiece||mm||4000~20000|
|Max.weight of workpiece||t||32|
|Form of bed guideway||Rectangular three guide rails|
|SPINDLE||Span of guideway||mm||1600|
|Power of spindle||kw||75|
|Center cone apex angle||75|
|spindle speed||stepless speed change|
|Range of spindle speed||r/min||0.8~160|
|Face chuck Dia.||mm||1600/1800|
|FEED||Max.torque of face chuck||knm||80|
|Range of cross feed||mm/min||1~1200|
|Travel of cross||mm||725|
|TURRET||Range of longitudinal feed||mm/min||1~4000|
|Travel of longitudinal||mm||4000~20000|
|Turret working pistion||V4|
|Size of turret||mm||70X70|
|TAILSTOCK||Max. cutting force||kn||80|
|Rapid of turret||kw||1.5|
|Dia./Travel of tailstock||mm||300/300|
|OTHERS||Taper hole of tailstock||100/1:7|
|Rapid of tailstock||mm/min||3000|
|Rapid of sleece||mm/min||64|
|CNC System||FANUC Series 0i-TD(optional Siemens system)|
· high speed high efficiency
· strong adapt ability high quality
· high precision good rigidity
Anyang Xinheng Machine Tool Co. Ltd. is a large professional manufacturer of LATHE, CNC LATHE, PIPE
THREAD LATHE, SPHERE TURNING LATHE etc.
Our factory has 60 years experience in machine tool production.And
our machine tools have been exported to more than 50 countries.
Tel: +86 372 3700288
Fax: +86 372 3700288
Whatsapp: +86 17839216015